MOTIVO COLORATO 2070

Product may differ from the image.

MOTIVO COLORATO 2070

Technical data sheet

Coloured, water-borne, quick-drying 1C top coat. Non-blocking and elastic with optimum levelling.

Description

Description
Product Description		Coloured, water-borne, quick-drying 1C top coat. Non-blocking and elastic with optimum levelling.
Raw Material Base / Binder Type / Active Agent		Polyurethane combination
Application		For furniture, interiors and general carpentry work.
Certificates / Label		Test standard compliance for: DIN 4102-1 B1 (Low flammability) EN 71-3 (Migration behaviour)
Minergie Eco		compatible
Colors		RAL and NCS shade cards Other shades available upon request.
Gloss Level		05,15,30,50

Technical Data

Technical Data	Product
Technical Data
Material Safety Data Sheet	257500
Density (20ºC)	1.192	g/cm³
Solids Content	46	± 1 w/w-%
Organic Solvent Content	6	± 1 w/w-%
VOC Content (EU)	68	g/L
Shelf Life at 20°C in Unopened Original Containers	max. 6 Months
Theoretical Coverage	120 g/m² → 8 m²/kg
The data apply for: MOTIVO COLORATO 2070 RAL 9010. Values can vary depending on color or gloss level.

Safety Data

Safety Data
Refer to the following safety data sheets as well as the instructions on the label
Product	257500 - MOTIVO COLORATO 2070

Application advice

Product		Data Sheet	Applied Quantity / Layer Thickness
Application advice Wood substrate
Primer:	MOTIVO COLORATO 2070	2575	120 g/m²
Intermediate sanding:	With grain 220-240
Recoating:	MOTIVO COLORATO 2070	2575	120 g/m²

Product		Data Sheet	Applied Quantity / Layer Thickness
MDF / HDF
Primer:	HYDROFILL PREMIUM 6338-00	63338	2-3x 220-250 g/m²
Intermediate sanding:	With grain 220-240
Recoating:	MOTIVO COLORATO 2070	2575	120 g/m²

Product		Data Sheet	Applied Quantity / Layer Thickness
Foil-laminated panels
Primer:	HYDROFILL PREMIUM 6338-00	63338	1-2x 150-200 g/m²
Intermediate sanding:	With sanding grain 220-240
Recoating:	MOTIVO COLORATO 2070	2575	80-100 g/m²

Product		Data Sheet	Applied Quantity / Layer Thickness
ABS plastics
Base Coat:	MOTIVO COLORATO 2070	2575	30-50 μm

For further applilcation proposals please ask our representative.

Preparation

Preparation
	Substrate	Every substrate must be well-cleaned, dry and free from grease and oil.
	Wood substrate	Sanding with grain 180-220
	MDF PF (primer foil)	Clean beforehand with SPEZIALBENZIN 0530-98, then sand the film with grain 180-220
	MDF / HDF rough	Sanding with grain 180-220
		On MDF boards with a moulded density of below 700 kg/m³ the surface must be pre-isolated or pre-treated with SUPREMO FÜLLGRUND 3910-00 or ALPOLAN UNIVERSALGRUND 2420-00. Strengthen edges and cut out sections with ALPOLAN UNIVERSALGRUND 2420-00 or SUPREMO FÜLLGRUND 3910-00. Use moisture-resistant wood-based materials for objects exposed to high humidity levels (e.g. kitchen, bathrooms, etc.) Do not use on horizontal surfaces.
	Plastics ABS	Refer to our VTM No. 2417 Preparing plastic profiles for initial coating.

Processing

Processing
	Preventative Measures	We recommend wearing personal protective clothing, even in cases where no local regulations are in force.
	Stir	Stir product well before use.
	Dilution	With water if necessary.
	Brush	Yes, in some cases, only small parts and strips
	Roller	No
	Trowel	No

Application

Application
		Viscosity	Dilution	Nozzle	Pressure	Spray Cycles
	Gravity Feed Gun	35-42" DIN 4 mm	5-20 %	1.8-2.0 mm	2-3 bar	2
	Suction Cup Gun	35-42" DIN 4 mm	0-5 %	1.8-2 mm	2-3 bar	2
	Airless-(Airmix) Spray Application	35-42" DIN 4 mm	0-5 %	0.23-0.28 mm	60-80 bar (material pressure). Atomising air pressure 1.0-1.5 bar	2
	HVLP Spray Gun	35-42" DIN 4 mm	0-5 %	1.8-2.0 mm	2-3 bar	2

Drying Time

Drying Time
	Drying Time	At 23°C and 65% rel. humidity
		Dust dry after:	60	minutes
		Touch dry after:	45	minutes
		Sandable after:	2	hours
		Recoatable after:	2	hours
		Fully dry after:	10	days

Important Remarks

Important Remarks
Specific Restrictions	If the substrate or room temperature is high, carefully add 2-5% VERZÖGERER 0102-00.
Storage Conditions	Store product tightly closed between +5 and +30° C.
Coating Removal	Strip
Equipment Cleaning	Immediately after use with water, dried up material with REINIGUNGSMITTEL S 8200-98

Haftung

This data sheet is for your reference and information only. The above data are correct to the best of our knowledge. We offer no guarantees for use and exclude any liability. This applies in particular to consequential damage. We are not liable for any advice given by our employees. Our employees give non-binding information only. Site supervision, compliance with handling regulations, and adherence to recognized engineering rules are the responsibility of the manufacturer, even if our employee was on site during handling. Modifications due to technical developments may be made. The latest version of this information is applicable. In special cases, please request separate technical specifications.

cross_products

REINIGUNGSMITTEL S 8200-98

HYDROFÜLLER 6335-00